Aprimatic TR4 Gate Remote control
Aprimatic TR4 Four Button Remote Control Transmitter
Aprimatic 433 MHz four button remote control for use with Aprimatic automatic gates and garage doors. Supplied with LR23A 12 volt battery and instructions.
Dimensions: 73mm x 42mm x 20mm.
Please note: if you use your remote control to open communal gates, barriers or an automated garage door you may not be able to program this remote control yourself. Contact the building or site management company to verify that the system is not code locked, if it is code locked you will not be able to register the remote control with the system. If you are a private owner then the programming of this remote control is simple. Programming Instructions Using a remote control that has already been programmed and is working. 1. Approach the control unit so you are standing a few feet away from it. 2. Press all buttons on the remote control that has already been programmed at the same time. Let them go. The receiver emits a beep. 3. Simultaneously press all buttons on your new remote control. Let them go. The beep stops. Wait 2 seconds. The beep starts back up. 4. Press a button on your new remote control. Let it go. 5. The beep stops. Wait 2 seconds. The beep starts back up. 6. Wait 10 seconds. The beep stops. 7. Your new remote control is programmed.